Difference between revisions of "2005 AMC 10A Problems/Problem 19"

(Created page with 'I')
 
(Note)
 
(19 intermediate revisions by 13 users not shown)
Line 1: Line 1:
I
+
== Problem ==
 +
Three one-inch squares are placed with their bases on a line. The center square is lifted out and rotated 45 degrees, as shown. Then it is centered and lowered into its original location until it touches both of the adjoining squares. How many inches is the point <math>B</math> from the line on which the bases of the original squares were placed?
 +
 
 +
<asy>
 +
unitsize(1inch);
 +
defaultpen(linewidth(.8pt)+fontsize(8pt));
 +
draw((0,0)--((1/3) + 3*(1/2),0));
 +
fill(((1/6) + (1/2),0)--((1/6) + (1/2),(1/2))--((1/6) + 1,(1/2))--((1/6) + 1,0)--cycle, rgb(.7,.7,.7));
 +
draw(((1/6),0)--((1/6) + (1/2),0)--((1/6) + (1/2),(1/2))--((1/6),(1/2))--cycle);
 +
draw(((1/6) + (1/2),0)--((1/6) + (1/2),(1/2))--((1/6) + 1,(1/2))--((1/6) + 1,0)--cycle);
 +
draw(((1/6) + 1,0)--((1/6) + 1,(1/2))--((1/6) + (3/2),(1/2))--((1/6) + (3/2),0)--cycle);
 +
draw((2,0)--(2 + (1/3) + (3/2),0));
 +
draw(((2/3) + (3/2),0)--((2/3) + 2,0)--((2/3) + 2,(1/2))--((2/3) + (3/2),(1/2))--cycle);
 +
draw(((2/3) + (5/2),0)--((2/3) + (5/2),(1/2))--((2/3) + 3,(1/2))--((2/3) + 3,0)--cycle);
 +
label("$B$",((1/6) + (1/2),(1/2)),NW);
 +
label("$B$",((2/3) + 2 + (1/4),(29/30)),NNE);
 +
draw(((1/6) + (1/2),(1/2)+0.05)..(1,.8)..((2/3) + 2 + (1/4)-.05,(29/30)),EndArrow(HookHead,3));
 +
fill(((2/3) + 2 + (1/4),(1/4))--((2/3) + (5/2) + (1/10),(1/2) + (1/9))--((2/3) + 2 + (1/4),(29/30))--((2/3) + 2 - (1/10),(1/2) + (1/9))--cycle, rgb(.7,.7,.7));
 +
draw(((2/3) + 2 + (1/4),(1/4))--((2/3) + (5/2) + (1/10),(1/2) + (1/9))--((2/3) + 2 + (1/4),(29/30))--((2/3) + 2 - (1/10),(1/2) + (1/9))--cycle);</asy>
 +
 
 +
<math> \textbf{(A)}\ 1\qquad\textbf{(B)}\ \sqrt{2}\qquad\textbf{(C)}\ \frac{3}{2}\qquad\textbf{(D)}\ \sqrt{2}+\frac{1}{2}\qquad\textbf{(E)}\ 2 </math>
 +
 
 +
==Solution==
 +
 
 +
Consider the rotated middle square shown in the figure. It will drop until length <math>DE</math> is 1 inch. Then, because <math>DEC</math> is a <math>45^{\circ}-45^{\circ}-90^{\circ}</math> triangle, <math>EC=\frac{\sqrt{2}}{2}</math>, and <math>FC=\frac{1}{2}</math>. We know that <math>BC=\sqrt{2}</math>, so the distance from <math>B</math> to the line is
 +
 
 +
<math>BC-FC+1=\sqrt{2}-\frac{1}{2}+1=\boxed{\textbf{(D) }\sqrt{2}+\dfrac{1}{2}}</math>.
 +
 
 +
[[File:AMC10200519Sol.png]]
 +
 
 +
 
 +
===Note===
 +
 
 +
(Refer to Diagram Above)
 +
 
 +
After deducing that <math>BC=\sqrt{2}</math>, we can compute the length from <math>C</math> to the baseline by subtracting <math>FC</math> (<math>1/2</math>) from the side length of the square(s) (<math>1</math>), giving <math>\frac{1}{2}</math>. 
 +
 
 +
Adding these up, we see that our answer is <math>\boxed{\textbf{(D) }\sqrt{2}+\dfrac{1}{2}}</math>.
 +
 
 +
- sdk652
 +
 
 +
Also, you can compute the distance from B (the top) to the bottom
 +
 
 +
==See Also==
 +
 
 +
{{AMC10 box|year=2005|ab=A|num-b=18|num-a=20}}
 +
 
 +
[[Category:Introductory Geometry Problems]]
 +
{{MAA Notice}}

Latest revision as of 22:58, 17 November 2024

Problem

Three one-inch squares are placed with their bases on a line. The center square is lifted out and rotated 45 degrees, as shown. Then it is centered and lowered into its original location until it touches both of the adjoining squares. How many inches is the point $B$ from the line on which the bases of the original squares were placed?

[asy] unitsize(1inch); defaultpen(linewidth(.8pt)+fontsize(8pt)); draw((0,0)--((1/3) + 3*(1/2),0)); fill(((1/6) + (1/2),0)--((1/6) + (1/2),(1/2))--((1/6) + 1,(1/2))--((1/6) + 1,0)--cycle, rgb(.7,.7,.7)); draw(((1/6),0)--((1/6) + (1/2),0)--((1/6) + (1/2),(1/2))--((1/6),(1/2))--cycle); draw(((1/6) + (1/2),0)--((1/6) + (1/2),(1/2))--((1/6) + 1,(1/2))--((1/6) + 1,0)--cycle); draw(((1/6) + 1,0)--((1/6) + 1,(1/2))--((1/6) + (3/2),(1/2))--((1/6) + (3/2),0)--cycle); draw((2,0)--(2 + (1/3) + (3/2),0)); draw(((2/3) + (3/2),0)--((2/3) + 2,0)--((2/3) + 2,(1/2))--((2/3) + (3/2),(1/2))--cycle); draw(((2/3) + (5/2),0)--((2/3) + (5/2),(1/2))--((2/3) + 3,(1/2))--((2/3) + 3,0)--cycle); label("$B$",((1/6) + (1/2),(1/2)),NW); label("$B$",((2/3) + 2 + (1/4),(29/30)),NNE); draw(((1/6) + (1/2),(1/2)+0.05)..(1,.8)..((2/3) + 2 + (1/4)-.05,(29/30)),EndArrow(HookHead,3)); fill(((2/3) + 2 + (1/4),(1/4))--((2/3) + (5/2) + (1/10),(1/2) + (1/9))--((2/3) + 2 + (1/4),(29/30))--((2/3) + 2 - (1/10),(1/2) + (1/9))--cycle, rgb(.7,.7,.7)); draw(((2/3) + 2 + (1/4),(1/4))--((2/3) + (5/2) + (1/10),(1/2) + (1/9))--((2/3) + 2 + (1/4),(29/30))--((2/3) + 2 - (1/10),(1/2) + (1/9))--cycle);[/asy]

$\textbf{(A)}\ 1\qquad\textbf{(B)}\ \sqrt{2}\qquad\textbf{(C)}\ \frac{3}{2}\qquad\textbf{(D)}\ \sqrt{2}+\frac{1}{2}\qquad\textbf{(E)}\ 2$

Solution

Consider the rotated middle square shown in the figure. It will drop until length $DE$ is 1 inch. Then, because $DEC$ is a $45^{\circ}-45^{\circ}-90^{\circ}$ triangle, $EC=\frac{\sqrt{2}}{2}$, and $FC=\frac{1}{2}$. We know that $BC=\sqrt{2}$, so the distance from $B$ to the line is

$BC-FC+1=\sqrt{2}-\frac{1}{2}+1=\boxed{\textbf{(D) }\sqrt{2}+\dfrac{1}{2}}$.

AMC10200519Sol.png


Note

(Refer to Diagram Above)

After deducing that $BC=\sqrt{2}$, we can compute the length from $C$ to the baseline by subtracting $FC$ ($1/2$) from the side length of the square(s) ($1$), giving $\frac{1}{2}$.

Adding these up, we see that our answer is $\boxed{\textbf{(D) }\sqrt{2}+\dfrac{1}{2}}$.

- sdk652

Also, you can compute the distance from B (the top) to the bottom

See Also

2005 AMC 10A (ProblemsAnswer KeyResources)
Preceded by
Problem 18
Followed by
Problem 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
All AMC 10 Problems and Solutions

The problems on this page are copyrighted by the Mathematical Association of America's American Mathematics Competitions. AMC logo.png