2011 AIME I Problems/Problem 8

In triangle $ABC$ , $BC = 23$ , $CA = 27$ , and $AB = 30$ . Points $V$ and $W$ are on $\overline{AC}$ with $V$ on $\overline{AW}$ , points $X$ and $Y$ are on $\overline{BC}$ with $X$ on $\overline{CY}$ , and points $Z$ and $U$ are on $\overline{AB}$ with $Z$ on $\overline{BU}$ . In addition, the points are positioned so that $\overline{UV}\parallel\overline{BC}$ , $\overline{WX}\parallel\overline{AB}$ , and $\overline{YZ}\parallel\overline{CA}$ . Right angle folds are then made along $\overline{UV}$ , $\overline{WX}$ , and $\overline{YZ}$ . The resulting figure is placed on a level floor to make a table with triangular legs. Let $h$ be the maximum possible height of a table constructed from triangle $ABC$ whose top is parallel to the floor. Then $h$ can be written in the form $\frac{k\sqrt{m}}{n}$ , where $k$ and $n$ are relatively prime positive integers and $m$ is a positive integer that is not divisible by the square of any prime. Find $k+m+n$ .

$[asy] unitsize(1 cm); pair translate; pair[] A, B, C, U, V, W, X, Y, Z; A[0] = (1.5,2.8); B[0] = (3.2,0); C[0] = (0,0); U[0] = (0.69*A[0] + 0.31*B[0]); V[0] = (0.69*A[0] + 0.31*C[0]); W[0] = (0.69*C[0] + 0.31*A[0]); X[0] = (0.69*C[0] + 0.31*B[0]); Y[0] = (0.69*B[0] + 0.31*C[0]); Z[0] = (0.69*B[0] + 0.31*A[0]); translate = (7,0); A[1] = (1.3,1.1) + translate; B[1] = (2.4,-0.7) + translate; C[1] = (0.6,-0.7) + translate; U[1] = U[0] + translate; V[1] = V[0] + translate; W[1] = W[0] + translate; X[1] = X[0] + translate; Y[1] = Y[0] + translate; Z[1] = Z[0] + translate; draw (A[0]--B[0]--C[0]--cycle); draw (U[0]--V[0],dashed); draw (W[0]--X[0],dashed); draw (Y[0]--Z[0],dashed); draw (U[1]--V[1]--W[1]--X[1]--Y[1]--Z[1]--cycle); draw (U[1]--A[1]--V[1],dashed); draw (W[1]--C[1]--X[1]); draw (Y[1]--B[1]--Z[1]); dot("$ A $",A[0],N); dot("$ B $",B[0],SE); dot("$ C $",C[0],SW); dot("$ U $",U[0],NE); dot("$ V $",V[0],NW); dot("$ W $",W[0],NW); dot("$ X $",X[0],S); dot("$ Y $",Y[0],S); dot("$ Z $",Z[0],NE); dot(A[1]); dot(B[1]); dot(C[1]); dot("$ U $",U[1],NE); dot("$ V $",V[1],NW); dot("$ W $",W[1],NW); dot("$ X $",X[1],dir(-70)); dot("$ Y $",Y[1],dir(250)); dot("$ Z $",Z[1],NE);[/asy]$

Page

Toolbox

Search

2011 AIME I Problems/Problem 8