Difference between revisions of "2009 USAMO Problems/Problem 5"

m
m
Line 30: Line 30:
 
dot("$T$", T, NW);
 
dot("$T$", T, NW);
 
</asy></center>
 
</asy></center>
 +
 +
'''If''':
  
 
Note that <cmath>\begin{align*}\measuredangle GBT+\measuredangle TRG&=\frac{m\widehat{TQ}}{2}+\measuredangle TRB+\measuredangle BRG\\
 
Note that <cmath>\begin{align*}\measuredangle GBT+\measuredangle TRG&=\frac{m\widehat{TQ}}{2}+\measuredangle TRB+\measuredangle BRG\\
 
&=\frac{m\widehat{TQ}+m\widehat{DQ}+m\widehat{CB}+m\widehat{BT}}{2}.\\
 
&=\frac{m\widehat{TQ}+m\widehat{DQ}+m\widehat{CB}+m\widehat{BT}}{2}.\\
 
\end{align*}</cmath>
 
\end{align*}</cmath>
Thus, <math>BTRG</math> is cyclic iff <math>\overline{BG}</math> bisects <math>\angle CBD</math> since that would imply <math>m\widehat{DQ}=m\widehat{QC}</math>.
+
Thus, <math>BTRG</math> is cyclic.
  
 
Also, note that <math>GSCP</math> is cyclic because <cmath>\begin{align*}\measuredangle CSG+\measuredangle GPC&=\measuredangle CBA+\measuredangle APC\\
 
Also, note that <math>GSCP</math> is cyclic because <cmath>\begin{align*}\measuredangle CSG+\measuredangle GPC&=\measuredangle CBA+\measuredangle APC\\
Line 40: Line 42:
 
\end{align*}</cmath> depending on the configuration.
 
\end{align*}</cmath> depending on the configuration.
  
Next, we have <math>T, G, C</math> are collinear since <cmath>\measuredangle GTR=\measuredangle GBR=\frac{m\widehat{DQ}}{2}=\frac{m\widehat{QC}}{2}=\measuredangle CTQ,</cmath> iff <math>\overline{BG}</math> bisects <math>\angle CBD</math>.
+
Next, we have <math>T, G, C</math> are collinear since <cmath>\measuredangle GTR=\measuredangle GBR=\frac{m\widehat{DQ}}{2}=\frac{m\widehat{QC}}{2}=\measuredangle CTQ.</cmath>
 
 
  
 
Therefore, <cmath>\begin{align*}\measuredangle RQP+\measuredangle PSR&=\frac{m\widehat{PBT}}{2}+\measuredangle PCG\\
 
Therefore, <cmath>\begin{align*}\measuredangle RQP+\measuredangle PSR&=\frac{m\widehat{PBT}}{2}+\measuredangle PCG\\
 
&=\frac{m\widehat{PBT}+m\widehat{TDP}}{2}\\
 
&=\frac{m\widehat{PBT}+m\widehat{TDP}}{2}\\
 
&=180^\circ
 
&=180^\circ
\end{align*}</cmath>
+
\end{align*},</cmath> so <math>PQRS</math> is cyclic.
iff <math>\overline{BG}</math> bisects <math>\angle CBD</math>, as desired. <math>\blacksquare</math>
+
 
 +
'''Only If''':
 +
These steps can be reversed.
  
 
== See Also ==
 
== See Also ==

Revision as of 16:18, 23 March 2014

Problem

Trapezoid $ABCD$, with $\overline{AB}||\overline{CD}$, is inscribed in circle $\omega$ and point $G$ lies inside triangle $BCD$. Rays $AG$ and $BG$ meet $\omega$ again at points $P$ and $Q$, respectively. Let the line through $G$ parallel to $\overline{AB}$ intersect $\overline{BD}$ and $\overline{BC}$ at points $R$ and $S$, respectively. Prove that quadrilateral $PQRS$ is cyclic if and only if $\overline{BG}$ bisects $\angle CBD$.

Solution

We will use directed angles in this solution. Extend $QR$ to $T$ as follows:

[asy] import cse5; import graph; import olympiad; dotfactor = 3; unitsize(1.5inch);  path circle = Circle(origin, 1); draw(circle);  pair A = (-.6, .8), B = (.6, .8), C = (.9, -sqrt(.19)), D = (-.9, -sqrt(.19)), G = bisectorpoint(C, B, D); draw(A--B--C--D--cycle); draw(B--D); dot("$A$", A, NW); dot("$B$", B, NE); dot("$C$", C, SE); dot("$D$", D, SW); dot("$G$", G, dir(40));  pair P = IP(L(A, G, 10, 10), circle, 1), Q = IP(L(B, G, 10, 10), circle, 1); draw(A--P--C); draw(B--Q); dot("$P$", P, SE); dot("$Q$", Q, S);  pair R = IP((-1, G.y)--(1, G.y), B--D), S = IP((-1, G.y)--(1, G.y), B--C); draw(P--Q--R--S--cycle); dot("$R$", R, N); dot("$S$", S, E);  pair T = IP(L(Q, R, 10, 10), circle, 0); draw(R--T--C, dashed); draw(T--B, dashed); dot("$T$", T, NW); [/asy]

If:

Note that \begin{align*}\measuredangle GBT+\measuredangle TRG&=\frac{m\widehat{TQ}}{2}+\measuredangle TRB+\measuredangle BRG\\ &=\frac{m\widehat{TQ}+m\widehat{DQ}+m\widehat{CB}+m\widehat{BT}}{2}.\\ \end{align*} Thus, $BTRG$ is cyclic.

Also, note that $GSCP$ is cyclic because \begin{align*}\measuredangle CSG+\measuredangle GPC&=\measuredangle CBA+\measuredangle APC\\ &=180^\circ\text{ or }0^\circ, \end{align*} depending on the configuration.

Next, we have $T, G, C$ are collinear since \[\measuredangle GTR=\measuredangle GBR=\frac{m\widehat{DQ}}{2}=\frac{m\widehat{QC}}{2}=\measuredangle CTQ.\]

Therefore, \begin{align*}\measuredangle RQP+\measuredangle PSR&=\frac{m\widehat{PBT}}{2}+\measuredangle PCG\\ &=\frac{m\widehat{PBT}+m\widehat{TDP}}{2}\\ &=180^\circ \end{align*}, so $PQRS$ is cyclic.

Only If: These steps can be reversed.

See Also

2009 USAMO (ProblemsResources)
Preceded by
Problem 4
Followed by
Problem 6
1 2 3 4 5 6
All USAMO Problems and Solutions

The problems on this page are copyrighted by the Mathematical Association of America's American Mathematics Competitions. AMC logo.png