Difference between revisions of "2013 AMC 12A Problems/Problem 23"
Armalite46 (talk | contribs) m (→Solution) |
Armalite46 (talk | contribs) m (→Solution) |
||
Line 11: | Line 11: | ||
The area also includes <math>4</math> circular segments. Two of them are quarter-segments of circles centered at <math>P</math> of radii <math>\sqrt{2}</math> (the segment bounded by <math> \overline{PA} </math> and <math> \overline{PA'}</math>) and <math>\sqrt{6}</math> (that bounded by <math>\overline{PC}</math> and <math>\overline{PC'}</math>). Assuming <math>A</math> is the bottom-left vertex and <math>B</math> is the bottom-right one, it is clear that the third segment is formed as <math>B</math> swings out to the right of the original square [recall that the square is rotated counterclockwise], while the fourth is formed when <math>D</math> overshoots the final square's left edge. To find the areas of these segments, consider the perpendicular from <math>P</math> to <math>\overline{BC}</math>. Call the point of intersection <math>E</math>. From the previous paragraph, it is clear that <math>PE = \sqrt{3}</math> and <math>BE = 1</math>. This means <math>PB = 2</math>, and <math>B</math> swings back inside edge <math>\overline{BC}</math> at a point <math>1</math> unit above <math>E</math> (since it left the edge <math>1</math> unit below). The triangle of the circular sector is therefore an equilateral triangle of side length <math>2</math>, and so the angle of the segment is <math>60^{\circ}</math>. Imagining the process in reverse, it is clear that the situation is the same with point <math>D</math>. | The area also includes <math>4</math> circular segments. Two of them are quarter-segments of circles centered at <math>P</math> of radii <math>\sqrt{2}</math> (the segment bounded by <math> \overline{PA} </math> and <math> \overline{PA'}</math>) and <math>\sqrt{6}</math> (that bounded by <math>\overline{PC}</math> and <math>\overline{PC'}</math>). Assuming <math>A</math> is the bottom-left vertex and <math>B</math> is the bottom-right one, it is clear that the third segment is formed as <math>B</math> swings out to the right of the original square [recall that the square is rotated counterclockwise], while the fourth is formed when <math>D</math> overshoots the final square's left edge. To find the areas of these segments, consider the perpendicular from <math>P</math> to <math>\overline{BC}</math>. Call the point of intersection <math>E</math>. From the previous paragraph, it is clear that <math>PE = \sqrt{3}</math> and <math>BE = 1</math>. This means <math>PB = 2</math>, and <math>B</math> swings back inside edge <math>\overline{BC}</math> at a point <math>1</math> unit above <math>E</math> (since it left the edge <math>1</math> unit below). The triangle of the circular sector is therefore an equilateral triangle of side length <math>2</math>, and so the angle of the segment is <math>60^{\circ}</math>. Imagining the process in reverse, it is clear that the situation is the same with point <math>D</math>. | ||
− | |||
− | |||
− | |||
Revision as of 20:35, 2 September 2013
Problem
is a square of side length . Point is on such that . The square region bounded by is rotated counterclockwise with center , sweeping out a region whose area is , where , , and are positive integers and . What is ?
Solution
We first note that diagonal is of length . It must be that divides the diagonal into two segments in the ratio to . It is not difficult to visualize that when the square is rotated, the initial and final squares overlap in a rectangular region of dimensions by . The area of the overall region (of the initial and final squares) is therefore twice the area of the original square minus the overlap, or .
The area also includes circular segments. Two of them are quarter-segments of circles centered at of radii (the segment bounded by and ) and (that bounded by and ). Assuming is the bottom-left vertex and is the bottom-right one, it is clear that the third segment is formed as swings out to the right of the original square [recall that the square is rotated counterclockwise], while the fourth is formed when overshoots the final square's left edge. To find the areas of these segments, consider the perpendicular from to . Call the point of intersection . From the previous paragraph, it is clear that and . This means , and swings back inside edge at a point unit above (since it left the edge unit below). The triangle of the circular sector is therefore an equilateral triangle of side length , and so the angle of the segment is . Imagining the process in reverse, it is clear that the situation is the same with point .
The area of the segments can be found by subtracting the area of the triangle from that of the sector; it follows that the two quarter-segments have areas and . The other two segments both have area .
The total area is therefore
This means , , and . So ; answer choice is correct.
See also
2013 AMC 12A (Problems • Answer Key • Resources) | |
Preceded by Problem 22 |
Followed by Problem 24 |
1 • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13 • 14 • 15 • 16 • 17 • 18 • 19 • 20 • 21 • 22 • 23 • 24 • 25 | |
All AMC 12 Problems and Solutions |
The problems on this page are copyrighted by the Mathematical Association of America's American Mathematics Competitions.